Heater Replacement

Heater Replacement

To replace a heater, please follow these steps:

  • Unplug the sauna from the wall for safety
  • Use a Philips screwdriver to begin dismounting the required heaters
  • Please be careful when doing so as to not lose screws or heater parts
  • Unplug the heater connector from behind the heater
  • Grab the new heater and plug into the heater connector
  • Mount the new heater in place with screws


    • Related Articles

    • Carbon Panel EMF Facts

      In collaboration with an award-winning EMF testing facility (NTS), Bill Cadwallader (MBA, EMRS is a Certified Electromagnetic Radiation Specialist) and Garett Gordon (M. Eng.) we are proud to present you the facts behind EMF and the differences ...

    • LED Check / Replacement

      In order to properly diagnose the cause of the issue, would you please place a working bulb into the non-working harness. This will test if the bulb needs replacement, or the harness itself. Also, please double check the connections on top of the ...

    • Heater layout per model

    • Heater Connections Check

      We’ve narrowed it down to the possible mis-matching polarity between the top connections that are on the roof of the sauna and the interior corner connections. You will need to remove the (large) dust cover on top with a phillips screwdriver and ...

    • Temperature Sensor Removal / Replacement

      Please follow the video below on how to remove or replace your temperature sensor.