Control Panel Operations

Control Panel Operations

Your sauna comes standard with a Control Panel to adjust the Time, Temperature, Audio, etc...

The reservation feature can only be set when the sauna is “off” but still plugged in.

You must first set the time on the controller.

  1. Short press (simple touch) the RES/LOCK button.

  2. Display will display time setting mode.

  3. Use time up and time down to set the time.

  4. Time will set after 3-5 seconds. Do not press any other buttons.

Set reservation time.

  1. Hold the RES/LOCK button for 3-5 seconds.

  2. Reservation time will appear in the display.

  3. Use time up and time down to set the time.

  4. Reservation time will set after 3-5 seconds. Do not press any other buttons.

During operation of the reservation feature, the sauna will only turn on for 30 minutes per safety regulations. Reservation must be set for each use per safety regulations.







    • Related Articles

    • Control Panel Check/Replacement

      Please follow the steps in this lock/unlock video before you begin troubleshooting: Unplug the sauna before starting this process. 1. Disconnect the controller from the power supply. There are 2-3 total connections to disconnect. The round data ...

    • Control Panel: Celsius to Fahrenheit

      In order to properly adjust the sauna controller's temperature reading from Celsius to Fahrenheit you will need to touch and hold 2 fingers on the Temp down and Lock buttons simultaneously for about 5 to 10 seconds. You will hear a "beep," and the ...

    • Carbon Panel EMF Facts

      In collaboration with an award-winning EMF testing facility (NTS), Bill Cadwallader (MBA, EMRS is a Certified Electromagnetic Radiation Specialist) and Garett Gordon (M. Eng.) we are proud to present you the facts behind EMF and the differences ...

    • Sauna Damage

      Finnmark has one of the lowest damage rates in the entire sauna industry. On average, we use 30% more packaging material than many of our competitors. Finnmark doesn't control handling or transportation once the sauna leaves our facility. Please ...

    • LED Check / Replacement

      In order to properly diagnose the cause of the issue, would you please place a working bulb into the non-working harness. This will test if the bulb needs replacement, or the harness itself. Also, please double check the connections on top of the ...